Видео

Awesome video! I just did my son's 96 F-350. I was able to remove the pitman arm from the gear box and leave it attached on the other end and just used zip ties to hold up out of the way until i got steering box dropped out of the way and replaced with new one. Instructions were perfect. He wasn't able to turn in either direction. Now it turns like butter. Thank you so much!

Martinez Karen Allen Matthew Hernandez Mark

What happens if you replace the car with a new battery and a new starter and a new alternator and it still won’t start but it will only start the engine with easy start if you can let me know many thanks 👍🏻

I guess I just fixed mine by removing the muffler and cleaning the screen. I had tried the low/high speed adjustment and only when I did this did it start to work. Thanks.

Praying this works.78 yr old lady got locked in back of our van when back doors locked. Had to help her crawl to front passenger side. 100° when happened.

Too bad new laptops don’t have expresscard slots.

go bigger or go home ,😂😂

that head light looks cool 😎

Tie a knot in the cable to shorten

Starter Relay???

Great explanation, especially about using trimmer at high speed!

i did all that and it still wont start

Got this lawnmower for free. Worked good one year then no more...tried changing the tank and carb still didbt work... Of i put napfta and it wants to go seems no suction at the ball primer. Real pain this carb.

I just buy same this go kart. Anyone know what year these Made?

Thank you.

So what is you opinion of operation in using it.....this is just a sales pitch unless you have actually used it....this was nothing different than going to there sight

Omg thank you! 🎉

⁷🎉😊😊

Where did you find a ford arm everything I see is dorman

How you adjust the RPMS I did all the steps now running at low RPMs

Fox body. I have a 94 f250 with a 7.5 liter. When towing heavy loads do you suggest hauling with Overdrive off with the E4OD? I’m heading from multiple sources I should. What’s your advice

Converted my JD F 930 electric clutch to cable idler pulley, now smooth engagement and no slippage. No more silly dual coil springs to maintain belt tension. Electric clutch is the worst idea, period 💪

Thanks for the video, my reverse safety switch light wouldn’t turn on and I couldn’t mow in reverse. I appreciate you showing the mechanism up close and how it works. 👍🏻

Well here we are in 2024 and those heads are being quoted at about $200.00 😢

I got a huskavarner , the blade kick on and want kick off even when u un plut the wire

Dude I almost just replaced the pushrods without checking the guides ! You saved me a headache , I should have known better but .. how do you adjust valve lash ?

This video just got me and this Chevy Cruze going again. God bless

I replaced the carburetor with a new one and changed gas filter, changed the spark plug still won't start.

Well done video! Best I've seen.

I bought a 1980s stand up freezer for $25 on market place its on the small side which is perfect for my tiny house. I dont think the energy savings would make up for the practically free freezer.

Can I use gum to cover my radiator leak instead of this. Your response will be appreciated

I have a 1998 Buick LeSabre Limited and the sub frame on mine is kinda rotting away in the same way, the bolts in that area are holding on but there's a crack running around it that is just barely over half way around,, but on the back of the car there's no rust at all, it's weird, the paint is still visible on the front where it's most rusty, but if it was any other car you'd call that "surface rust"

Hey I got the same engine and I'm trying to pull my alternator out the pivot is seemingly seized and I can't pull the alternator out. Is there a trick to pushing it out or rotating it in a spot to come out?

Very nice thank you

awesome video! I did this and pulled out tons of stuff from the filter. Immediately ran a cycle but still getting the f02 error?

Great video, Thank you. However the mower that I am working on has sat outside for a few years and I believe the clutch has rusted up and just not working.

I'm just wondering if I could get a detailed message about how to hook up the bike trailer to the moped detailed message for hookup parts

Thank you so much man!!! Liked and subwd😊

I've been given about 10 or so 3.5 to 5 HP B&S engines this year all non-running. Honestly 95% of them needed the gasket between the carb and fuel tank. A super easy and quick fix that makes the machine run like new. This video really helped with getting into working on these engines. 👍

Briggs and Stratton Intek motors have a factory design flaw with the head gaskets, theirs a strip of gasket that doesn't get bolted down in the middle and sucks oil from the valves into the cylinder

Much respect. Doing this on my Econoline club wagon 350 w/ a 460 now

Have Briggs and Stratton 16hp ohv has compression 145psi both cylinders has spark check plug to ground has fuel but won’t even pop with starting fluid got me stumped?

Hi, diaphragm on mine seems like yours and when I push on the "big puff" it doesn't come back so is it obviously to replace (as 2 cycles) or it can works like that...??? Tnx for answering someone

Never use carb clean on plastic or rubber. Will swell rubber parts. Brake cleaner is better. Great Vid, thanks.

My very large 1975 GE freezer is still running strong! Seems like it cost me near nothing to run it because it's always been in a basement and the compressor rarely turns on. 3 years ago, I bought a new replacement for the old one goes so I am not left with nowhere to put my frozen goods, but the old one is still doing well. And on a side note, the old one freezes to 0 degrees, there is no option to change that. The new freezer does not seem to go to zero, again no option to change the temperature. Seems food, especially REAL food (meat/veg) last longer at zero degrees.

How much does one of these weigh?

This video was a lifesaver, clear and concise. It took me a looooooong time to find one with the same motor that I have in my Craftsman push mower. Thanks a million!

I know this vid is a 100 years old but you never showed how the new head will fix this problem .... What did B+S change on the new head to fix this defect?? Or will the 300$ replacement still have the same problem?? Thanks.

sure glad they don't make em like this anymore.

My truck had that from the factory….its ok. But sort of lame